Severity: 8192
Message: Return type of CI_Session_files_driver::open($save_path, $name) should either be compatible with SessionHandlerInterface::open(string $path, string $name): bool, or the #[\ReturnTypeWillChange] attribute should be used to temporarily suppress the notice
Filename: drivers/Session_files_driver.php
Line Number: 132
Backtrace:
File: /home/vectordo/public_html/application/controllers/Welcome.php
Line: 5
Function: __construct
File: /home/vectordo/public_html/index.php
Line: 315
Function: require_once
Severity: 8192
Message: Return type of CI_Session_files_driver::close() should either be compatible with SessionHandlerInterface::close(): bool, or the #[\ReturnTypeWillChange] attribute should be used to temporarily suppress the notice
Filename: drivers/Session_files_driver.php
Line Number: 294
Backtrace:
File: /home/vectordo/public_html/application/controllers/Welcome.php
Line: 5
Function: __construct
File: /home/vectordo/public_html/index.php
Line: 315
Function: require_once
Severity: 8192
Message: Return type of CI_Session_files_driver::read($session_id) should either be compatible with SessionHandlerInterface::read(string $id): string|false, or the #[\ReturnTypeWillChange] attribute should be used to temporarily suppress the notice
Filename: drivers/Session_files_driver.php
Line Number: 168
Backtrace:
File: /home/vectordo/public_html/application/controllers/Welcome.php
Line: 5
Function: __construct
File: /home/vectordo/public_html/index.php
Line: 315
Function: require_once
Severity: 8192
Message: Return type of CI_Session_files_driver::write($session_id, $session_data) should either be compatible with SessionHandlerInterface::write(string $id, string $data): bool, or the #[\ReturnTypeWillChange] attribute should be used to temporarily suppress the notice
Filename: drivers/Session_files_driver.php
Line Number: 237
Backtrace:
File: /home/vectordo/public_html/application/controllers/Welcome.php
Line: 5
Function: __construct
File: /home/vectordo/public_html/index.php
Line: 315
Function: require_once
Severity: 8192
Message: Return type of CI_Session_files_driver::destroy($session_id) should either be compatible with SessionHandlerInterface::destroy(string $id): bool, or the #[\ReturnTypeWillChange] attribute should be used to temporarily suppress the notice
Filename: drivers/Session_files_driver.php
Line Number: 317
Backtrace:
File: /home/vectordo/public_html/application/controllers/Welcome.php
Line: 5
Function: __construct
File: /home/vectordo/public_html/index.php
Line: 315
Function: require_once
Severity: 8192
Message: Return type of CI_Session_files_driver::gc($maxlifetime) should either be compatible with SessionHandlerInterface::gc(int $max_lifetime): int|false, or the #[\ReturnTypeWillChange] attribute should be used to temporarily suppress the notice
Filename: drivers/Session_files_driver.php
Line Number: 358
Backtrace:
File: /home/vectordo/public_html/application/controllers/Welcome.php
Line: 5
Function: __construct
File: /home/vectordo/public_html/index.php
Line: 315
Function: require_once
Severity: Warning
Message: ini_set(): Session ini settings cannot be changed after headers have already been sent
Filename: Session/Session.php
Line Number: 282
Backtrace:
File: /home/vectordo/public_html/application/controllers/Welcome.php
Line: 5
Function: __construct
File: /home/vectordo/public_html/index.php
Line: 315
Function: require_once
Severity: Warning
Message: session_set_cookie_params(): Session cookie parameters cannot be changed after headers have already been sent
Filename: Session/Session.php
Line Number: 294
Backtrace:
File: /home/vectordo/public_html/application/controllers/Welcome.php
Line: 5
Function: __construct
File: /home/vectordo/public_html/index.php
Line: 315
Function: require_once
Severity: Warning
Message: ini_set(): Session ini settings cannot be changed after headers have already been sent
Filename: Session/Session.php
Line Number: 304
Backtrace:
File: /home/vectordo/public_html/application/controllers/Welcome.php
Line: 5
Function: __construct
File: /home/vectordo/public_html/index.php
Line: 315
Function: require_once
Severity: Warning
Message: ini_set(): Session ini settings cannot be changed after headers have already been sent
Filename: Session/Session.php
Line Number: 314
Backtrace:
File: /home/vectordo/public_html/application/controllers/Welcome.php
Line: 5
Function: __construct
File: /home/vectordo/public_html/index.php
Line: 315
Function: require_once
Severity: Warning
Message: ini_set(): Session ini settings cannot be changed after headers have already been sent
Filename: Session/Session.php
Line Number: 315
Backtrace:
File: /home/vectordo/public_html/application/controllers/Welcome.php
Line: 5
Function: __construct
File: /home/vectordo/public_html/index.php
Line: 315
Function: require_once
Severity: Warning
Message: ini_set(): Session ini settings cannot be changed after headers have already been sent
Filename: Session/Session.php
Line Number: 316
Backtrace:
File: /home/vectordo/public_html/application/controllers/Welcome.php
Line: 5
Function: __construct
File: /home/vectordo/public_html/index.php
Line: 315
Function: require_once
Severity: Warning
Message: ini_set(): Session ini settings cannot be changed after headers have already been sent
Filename: Session/Session.php
Line Number: 317
Backtrace:
File: /home/vectordo/public_html/application/controllers/Welcome.php
Line: 5
Function: __construct
File: /home/vectordo/public_html/index.php
Line: 315
Function: require_once
Severity: Warning
Message: ini_set(): Session ini settings cannot be changed after headers have already been sent
Filename: Session/Session.php
Line Number: 375
Backtrace:
File: /home/vectordo/public_html/application/controllers/Welcome.php
Line: 5
Function: __construct
File: /home/vectordo/public_html/index.php
Line: 315
Function: require_once
Severity: Warning
Message: session_set_save_handler(): Session save handler cannot be changed after headers have already been sent
Filename: Session/Session.php
Line Number: 110
Backtrace:
File: /home/vectordo/public_html/application/controllers/Welcome.php
Line: 5
Function: __construct
File: /home/vectordo/public_html/index.php
Line: 315
Function: require_once
Severity: Warning
Message: session_start(): Session cannot be started after headers have already been sent
Filename: Session/Session.php
Line Number: 143
Backtrace:
File: /home/vectordo/public_html/application/controllers/Welcome.php
Line: 5
Function: __construct
File: /home/vectordo/public_html/index.php
Line: 315
Function: require_once
HP positions the ProBook 430 between the consumer and business classes. The model offers a few nice business features, like the fingerprint reader, data encoding software and the mobile broadband card. These set our model apart from the crowd. Furthermore, HP offers a multitude of accessories and the warranty can be adjusted according to the preferences of the user.
However, the laptop lacks a lot of physical security features, a docking interface and a good (better) display. The above-mentioned flaws deny the notebook classification as a business model.
Buyers willing to invest a little more money will find that adding a secondary RAM module or an SSD is well worth the effort. Overall, the ProBook 430 is not as well-balanced as one would expect of an EliteBook, but it deserves a recommendation thanks to its pricing. However, the buyer should not expect a full-blown business notebook for this price, as this model is closer to consumer devices and scores points thanks to its extensive warranty and upgrade options.
Feature |
Description |
Processors |
4th generation Intel Core Processors |
Chipset |
Mobile Intel HM77 |
Graphics |
Integrated graphics |
Display |
|
Storage and drives |
Hard drives
|
Optical drives |
External optical disk drive |
Memory |
Standard
|
Networking/Communications |
Broadband wireless (WWAN)2
|
Webcam |
720p HD webcam3 |
NOTE: |
Specification |
Description |
13.3-inch LED HD (1366 x 768) anti-glare |
|
active Area (w x h) |
29.3 x 16.5 cm (11.53 x 6.49 in) |
Diagonal size |
33.8cm (13.3 in) |
Surf ace treatment |
Anti-glare |
Contrast ratio |
400:1 (min) |
Refresh rate |
60 Hz |
Brightness |
200 nit (typical) |
Pixel resolution |
|
Backlight |
LED |
PPI |
118 ppi |
Viewing angle |
|
Specification |
Description |
500GB 7200 rpm SATA Hard Drive |
|
Drive weight |
115g (0.25 lb) |
Capacity |
500GB |
Height |
7 mm (0.276 in) |
Width |
70 mm (2.75 in) |
Interface |
ATA-8, SATA 2.6, 3.0 Gb/s, NCQ |
Transfer rate |
Synchronous (maximum) 300MB/s (Drive Capability) |
Seek time (typical reads, including settling) |
|
Rotational speed |
7200 rpm |
Logical blocks |
976,773,168 |
Operating temperature |
0° to 60° C (32° to 140° F) [case temp] |
Features |
ATA security |
320GB 5400 rpm SATA Hard Drive |
|
Drive weight |
101 g (0.22 lb) |
Capacity |
320GB |
Height |
7 mm (0.276 in) |
Width |
70 mm (2.75 in) |
Interface |
ATA-8, SATA 2.6, 3.0 Gb/s, NCQ |
Transfer rate |
Synchronous (maximum) 300MB/s (Drive Capability) |
Seek time (typical reads, including settling) |
|
Rotational speed |
5400 rpm |
Logical blocks |
625,142,448 |
Operating temperature |
0° to 60° C (32° to 140° F) [case temp] |
Features |
ATA security |
500GB 5400 rpm SATA Hard Drive |
|
Drive weight |
101 g (0.22 lb) |
Capacity |
500GB |
Height |
7 mm (0.276 in) |
Width |
70 mm (2.75 in) |
Interface |
ATA-8, SATA 2.6, 3.0 Gb/s, NCQ |
Transfer rate |
Synchronous (maximum) 300MB/s (Drive Capability) |
Seek time (typical reads, including settling) |
|
Rotational speed |
5400 rpm |
Logical blocks |
976,773,168 |
Operating temperature |
0° to 60° C (32° to 140° F) [case temp] |
Features |
ATA security |
SATA 6Gb/s 128GB, 2.5-inch Solid State Drive |
|
Drive weight |
73 Grams |
Capacity |
128GB |
Height |
7 mm (0.276) |
Width |
70 mm (2.76 in) |
Interface |
SATA 3 (6 Gb/s) |
Performance Rate |
|
Specification |
Description |
Broadband Wireless (WWAN) |
|
Wireless LAN (WLAN) |
|
Communications |
Realtek 10/100/1000 ethernet controller |
NOTE: |
Specification |
Description |
|
Hardware |
||
Implementation |
IDT 92HD91 |
|
Function key volume |
Volume up, volume down, and mute |
|
Full duplex |
Yes |
|
Microphone in |
Stereo |
|
Headphone/line out |
Stereo |
|
Integrated microphone |
Yes, dual digital microphone array when equipped with optional webcam |
|
Audio output quality |
||
Frequency response |
20 Hz - 20 kHz |
|
Signal to noise ratio |
Less than 85 dB |
|
Total harmonic distortion |
0.01% |
|
Noise floor |
- 110 dB |
|
Play/Record sampling rate(s) |
8 kHz - 48 kHz |
|
D ac |
16, 20 or 24-bit |
|
ADC |
16 or 20-bit |
|
Internal stereo speakers |
||
Power rating |
2 W |
|
Impedance |
4 ohms |
HP 65W EM Smart AC Adapter |
|
Specification |
Description |
Dimensions |
12.65 x 5.0 x 3.0 cm (4.98 x 1.97 x 1.18 in) |
Weight |
290 g (0.62 lb) |
Input |
190 to 265 V ac Input Efficiency: 87% min at 115 V ac Input frequency range: 47 to 63 Hz Input ac current: 1.7 A at 90 V ac |
Output |
Output power: 65W DC output: 19.5V Hold-up time: 5 msec at 115 V ac input Output current limit: less than 11 A, Over voltage protection- 29V max automatic shutdown |
Connector |
3 pin/grounded, mates with interchangeable cords |
Environmental design |
Operating temperature: 0° to 35° C (32° to 95° F) Non-operating (storage) temperature: -20° to 85° C (-4° to 121° F) Altitude: 0 to 5,000 m (0 to 16,405 ft) Humidity: 0% to 95% Storage Humidity: 0% to 95% |
EMI and safety certifications |
CE Mark - full compliance with LVD and EMC directives; Worldwide safety standards - IEC60950, EN60950, UL60950, Class1, SELV; Agency approvals - C-UL-US, NORDICS, DENAN, EN55022 Class B, FCC Class B, CISPR22 Class B, CCC, NOM-1 NYCE; Reliability - failure rate of less than 0.1% annually within the first three years of operation. |
4-Cell (44 WHr) Lithium- Ion battery |
|
Cells/Type |
4-cell Lithium-Ion |
Dimensions(H x W x L) |
2.18 x 3.56 x 27.72 cm (0.86 x 1.4 x 8.0 in) |
Weight (max) |
Greater than 250 g (0.551 lb) |
Energy |
|
Voltage |
14.8V DC |
Amp-hour capacity |
2850mAh |
Watt-hour Capacity |
44 WHr |
4-Cell (41 WHr) Lithium-Ion battery |
|
Cells/Type |
4-cell Lithium-Ion |
Energy temperature |
Watt-hour cap acity: 41 WHr Operating (Charging): 0° to 45° C (32° to 113° F) Operating (Discharging): (-10° to 60° C) Non-operating: (-20° to 60° C) -4° to 140° F |
Battery re-Charge time |
System in OFF or Standby Mode: 2.5 hours System ON: 3 to 5 hours (depending on system power consumption) HP Fast Charge Technology: Charges the battery up to 90% within 90 minutes when system is OFF |
HP 45W Smart AC Adapter |
|
Dimensions |
9.6 x 4.95 x 2.24 cm (3.78 x 1.95 x 0.88 in) |
Input |
90 to 265 VAC
|
Output |
|
Connector |
3 pin/grounded, mates with interchangeable cords |
Environmental Design |
|
EMI and Safety Certifications |
CE Mark - full compliance with LVD and EMC directives; Worldwide safety standards - IEC60950, EN60950, UL60950, Class1, SELV; Agency approvals - C-UL-US, NORDICS, DENAN, EN55022 Class B, FCC Class B, CISPR22 Class B, CCC, NOM-1 NYCE; Reliability - failure rate of less than 0.1% annually within the first three years of operation. |
Specification |
Description |
Energy consumption |
|
Normal operation |
|
Sleep (Energy Star low power mode) |
|
Off |
|
Heat Dissipation 1 |
|
Normal operation |
|
Sleep |
|
Off |
|
NOTE: |
Feature |
Description |
Weights and dimensions |
Weight
|
Ports/Slots |
Ports
|
Digital media slots |
|
NOTE: |
Feature |
Description |
Operating system |
|
Preinstalled software with windows operating system |
|
Security |
Standard
|
Specification |
Description |
|
Stand-Alone power |
Nominal operating: 19 V |
|
Requirements (ac Power) |
Voltage Average operating power: 19.19 W Max Operating Power: 35.84W |
|
Temperature |
Operating
|
|
Relative humidity |
Operating: 10% to 90%, non-condensing Non-operating: 5% to 95%, 101.6° F (38.7° C) maximum wet bulb temperature |
|
Shock |
Operating: 40 G, 2 ms, half-sine Non-operating: 200 G, 2 ms, half-sine |
|
Random Vibration |
Operating: 0.75 grms Non-operating: 1.50 grms |
|
Altitude (unpressurized) |
Operating: -15.24 to 3,048 m (-50 to 10,000 ft) Non-operating: -15.24 to 12,192 m (-50 to 40,000 ft) |
|
Planned industry standard certifications |
|
Specification |
Description |
HP Fingerprint Sensor (optional) |
|
Mobile voltage operation |
3.0V -3.6V single supply |
Operating temperature |
0° - 70°C (32° - 158°F) |
Current consumption at 3.3 V |
|
High-rate image capture |
Up to 240 image frames /sec |
ESD resistance |
IEC 61000-4-2 Level 4 (±15KV) |
Detection matrix |
|